Click here to get yours today
- We have made some changes, just to make it that much better
- Black Friday Sale on Now!
- We NOW offer a Race Version of our B Series Map Sensor
- Black Friday is around the corner, more details to come
- A Dream End to the Season
- Battling Through The Season - Boersma Racing
- NEW! Wrinkle Grey - Limited run get yours today
- Race Report Gridlife Midwest and MidOhio 2024
- FK8 Clutch Master Cylinder and Clutch Line Kit, is now here
- Behind the Wheel : Chris Boersma
- December 2024
- November 2024
- October 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- December 2022
- November 2022
- September 2022
- August 2022
- June 2022
- May 2022
- April 2022
- December 2021
- November 2021
- September 2021
- August 2021
- July 2021
- March 2021
- February 2021
- July 2019
- January 2019
- December 2018
- November 2018
- October 2018
- August 2018
- July 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- February 2015
We have made some changes, just to make it that much better
Posted by on 12/3/2024
to Product News
Black Friday Sale on Now!
Posted by on 11/25/2024
Our Black Friday Sale has started and will run until December 2nd, 2024
Get your holiday shopping done early
Click the link below
https://k-tuned.3dcartstores.com/black-friday-sale.html
We NOW offer a Race Version of our B Series Map Sensor
Posted by on 11/21/2024
K-Tuned Race MAP Sensors are designed to be a simple solution for mounting a MAP sensor. With many aftermarket manifolds and throttle bodies we often lose the OEM MAP port. This Race MAP sensor offers a simple solution for this. The 1/8 NPT port can be threaded directly into ports on the manifold or throttle body. It can also be remote mounted with a line and optional bracket.
A Dream End to the Season
Posted by on 11/4/2024
to K-Tuned News
Click Here to Read Full Article
Battling Through The Season - Boersma Racing
Posted by on 10/9/2024
to K-Tuned News
Battling Through The Season!
Leaving Mid-Ohio we had gotten a handle on the car for the first time this season. We left that event more confident with the setup and handling of the car then previously and we had a much shorter list of things to tackle which was a great feeling! We did decide we wanted to put a fresh engine in the car as a precautionary measure. This engine had the accident on it and though everything seemed fine, we didn't want to have a catastrophic failure at our next event at Road America. This track is notorious for being hard on the cars and seeing 165+mph multiple times on track meant we wanted to be safer rather then sorry.Click Here to read full article
NEW! Wrinkle Grey - Limited run get yours today
Posted by on 8/8/2024
to Product News
Looking for a way to make your engine bay pop even more? Look no further, we have listen to the masses and here it is!
We have taken our Valve cover and splashed it with wrinkle grey coat.
Get yours while supplies last.
These are a limited quantity item once they are gone that is it!
Race Report Gridlife Midwest and MidOhio 2024
Posted by on 7/9/2024
to K-Tuned News
Like a Phoenix Rising From The Ashes!
Leaving our event at Carolina Motorsports Park, we had a very broken car and we knew we had a lot of work to do to get ready for the MidWest Festival. The team got to work immediately identifying what we had broken, what we needed to order and what our plan of attack was going to be. The list was long and there were many ideas we threw around but Eric and Gregg picked the plan they thought would be best and got to work.
Click HERE to read full article
FK8 Clutch Master Cylinder and Clutch Line Kit, is now here
Posted by on 6/18/2024
to Product News
Click Here to get yours today
Behind the Wheel : Chris Boersma
Posted by on 6/10/2024
to K-Tuned News
Click Below to read the full article
Our updated 80mm TB
Posted by on 6/7/2024
to Product News
Click below to get yours today
The wait is over! Here is our 10th Gen shifter
Posted by on 5/31/2024
to Product News
Like our other shifters we went with a primarily billet aluminum assembly to ensure the strongest overall design and reduced flex. Where needed we have used stainless steel for strength on cable attachment points and in the center shifter rod assembly. Some Delrin is used on pivot points to ensure a smooth feel for long time to come.
Designed to be a direct replacement for 2016 - 2021 Civic Base, Si and FK8 Type R. The shifter features independently adjustment of throw, gate, shift knob height, and shift knob offset. This allows you to get a short throw front-back, wide gate side-to-side, and a shift knob position that feels comfortable.
Bigger is Better!
Posted by on 5/16/2024
to Product News
Bigger is always better! We now offer a 74mm Drive By Wire Throttle body!
Click down below to get yours today
2024 Season Kick Off - GridLife Carolina Motorsports Park
Posted by on 4/24/2024
to K-Tuned News
Click down below for the full article
K-Series Detent Spring
Posted by on 4/9/2024
to Product News
Click Below to get yours today
Need a stronger and more durable MAP Sensor, well we have come up with our Stainless Steel Race Map Sensor and Optional Mounting Bracket
Posted by on 3/22/2024
K-Tuned Race MAP Sensors are designed to be a simple solution for mounting a MAP sensor. With many aftermarket manifolds and throttle bodies we often lose the OEM MAP port. This Race MAP sensor offers a simple solution for this. The 1/8 npt port can be threaded directly into ports on the manifold or throttle body. It can also be remote mounted with a line and optional bracket.
We offer this sensor in 1.7BAR (Stock Reading), 4BAR, and 7BAR. We suggest you pick the sensor that closest matches you real world applications to get the most accurate readings.
Click below to get yours today
FK8 / FL5 Type R Magnetic Dip Stick
Posted by on 3/15/2024
to Product News
It's finally here! We want to make your Type R engine look cleaner and easier to check your oil levels. Click down below to get yours today
Click below to get yours today
NEW PRODUCT ALERT!!! Brake Master Brace are here!
Posted by on 3/13/2024
to K-Tuned News
Tired of your stock ECU cover?? We have something exciting for you
Posted by on 2/16/2024
to Product News
Our Billet ECU case designed around the 02-04 RSX ECU. This is primarily meant to work with the new Link G4X K20 and Hondata Kpro.
Features 2 rubber grommets giving a simple way to have wires to connect additional io, one round port that can be used for vacuum hose or Link cable connection. Base has four M6 mounting holes to make mounting simple.
Features 2 rubber grommets giving a simple way to have wires to connect additional io, one round port that can be used for vacuum hose or Link cable connection. Base has four M6 mounting holes to make mounting simple.
Click the link below for more information
Looking somewhere to mount your Map Sensor? We have created that will help you!!!
Posted by on 1/25/2024
to Product News
Click Below for more information
Our Newly redesign Billet RSX Shifter
Posted by on 1/23/2024
to Product News
Newest revision of our popular Billet RSX Shifter. V3 features a full overhaul. The center cage section now uses self lubricating Delrin to ensure the longest and smoothest operation. We have retained the ability to adjust seat pressure but moved it to the top to make adjustment
Two available designs. Street version features an elbow that rotates through 10 positions to allow greater adjustment for ship knob position. You can also retain the shift boot in certain situations if installed in an RSX or using our under car mounting kit in a swap car. The drag/race version features a stronger elbow directly connected to the cables to reduce flex and increase overall strength.
Click the link below to get yours today
Needing that little extra? Well we have just release our Extended Wheel Studs
Posted by on 1/10/2024
We now offer extended wheels studs perfect for any build!
Click the link below to get yours today
Shift Selector Spring
Posted by on 12/28/2023
to Product News
We have improved on the OEM spring, we made our springs 80% stiffer. Which is to aid the shifter selector and shifter back to center.
Click Below
We have suspension and Big Brakes for your Non Honda Cars as well, check out Track One Development
Posted by on 12/12/2023
to K-Tuned News
We have listen to the masses and a lot of people have been asking for Coilovers and Big Brake Kits for their non Honda cars. We have been developing our suspension for all types of driving from your daily driver to your track car.
Please feel free to contact us if you have questions
Looking to keeping warm this holiday season and stylish? Check out our new hoodie and sweatpant
Posted by on 12/6/2023
to Product News
Click the link below: